We say

 We say – Curing for the process of allowing homemade soap to dry out and harden for a certain amount of time before it’s ready to use. The purpose of curing is to evaporate slowly any excess water in the soap, making it last longer and have a better lather. It is essential for the homemade soap quality.

Time of curing process can vary, but in general requires around 4-6 weeks for a cold-process soap – before it’s ready to use.

The curing process involves setting aside the new unmolded/sliced soaps in an area with good air circulation and low humidity for several weeks before using them. During this time soap bars will be turned every few days; and carefully checked for any discoloration or mold.

During the period - the excess water content in the soap will evaporate, making it harder and longer-lasting, with enhanced cleansing properties. Freshly made soaps may contain excess lye that can irritate the skin, or cause problems including burns. During curing, saponification (the chemical process that turns oil into soap) continues to occur as any remaining oils are fully converted into soap molecules.

The finished product will lather better and clean more effectively. And it’s completely harmless.

Comments

Post a Comment

Popular posts from this blog

Handmade natural soaps and cosmetics

Image
 The production of natural soaps and cosmetics requires a thorough knowledge of the processes, as well as a very precise adherence to the recipes. They are quite often a protected object of intellectual property. The reason for this is reaching certain results, which is associated with considerable financial costs and time.In second place, the ingredients are extremely important. Their purity, percentage content and repeatability. It is precisely for this reason that it is good to work with the products of the same manufacturer, if you are satisfied with its production.Often, beginners are seduced by a lower price and this leads to disappointments.Of course, the beauty and wonderful aroma you can achieve is also important.Last but not least is the responsibility towards your customers and their health.The technological processes are not the same and must be followed very precisely.For example, the soap matures for 30 to 40 days in a cabinet that strictly maintains a certain tempera...
Read more

HANDMADE SOAP TEND TO MELT OR GET SOFTER FASTER WHY IS THAT?

    HANDMADE SOAP BARS ARE MADE IN THE OLD KNOWN WAY – BY A PROCESS OF SAPONIFICATION BETWEEN TWO SUBSTANCES: OIL/BUTTER AND LYE AS A RESULT - YOU GOT SOAP WITH GLYCERIN   Homemade soap bars are very different, and higher in glycerin content than most commercial soap bars available at the market. Most commercial soaps are made from surfactants & detergents/combined/, and have less glycerin intentionally – so that they do not sweat nor shrink with the time, and get a longer shelf life. All these facts are of course economically reasonable.   Glycerin is a humectant well known for its ability to attract and lock moisture into the skin - softening, smoothing, and soothing the skin. But because of this particular property of glycerine, when it is in a handmade soap, it has the tendency to soak up water surrounding it.   So if your shower or bath room is steamy and warm, handmade soap will just absorb all this moisture and get softer. Also, i...
Read more